Office staple pin is standardized by their crown width and leg length, It is Manual Stapler Staples,which must match the stapler they are designed for.
The most common sizing system of Office Staple Pin uses a number like #10, #26, #23, #24, #13, etc. These numbers correspond to specific dimensions.
|
Staple Size |
Crown Width |
Leg Length |
Common Use |
|
#10 / Standard |
¼" (6.3mm) |
⅜" (10mm) |
Full-Size Desk Staplers. The most common size for general office use. |
|
#26 / Heavy-Duty |
¼" (6.3mm) |
½" (13mm) |
Heavy-Duty Staplers. For stapling 50+ pages or thick booklets. |
|
#23 |
⅜" (9.5mm) |
⅜" (10mm) |
Light-Duty Staplers. Often found in mini or "pocket" staplers. |
|
#24 |
⅜" (9.5mm) |
½" (13mm) |
Heavy-Duty "Pistol Grip" Staplers. For construction, upholstery, and wiring. |
|
#13 (Flat Clinch) |
¼" (6.3mm) |
⅜" (10mm) |
Staplers that bend legs flat against the paper instead of inward. |
|
#210 (Mini) |
~⅛" (3.5mm) |
¼" (6mm) |
Mini staplers for very small, discreet staples. |
Crucial Note: The numbering system is not universal. A #10 from one brand is generally compatible with a #10 from another, but the most important factor is to match the Office Staple Pin size to your specific stapler model. The correct size is almost always printed on the bottom of the stapler itself.
Hot Tags: office staple pin, China office staple pin manufacturers, suppliers, J Brad Staple for Furniture, Copper Carton Staples, Sofa Staples, Staple Pins For Furniture, Manual Stapler Staples, F Brad Staple for Furniture
