1 Inch Nail Making Machine X50

1. The machine has a long service life, comparable to or exceeding that of traditional nail making machines. Wear parts are low-cost, have minimal wear, and are easy to replace.

2. The machine automatically applies oil, requiring far fewer lubrication points than traditional machines and other high speed nail making machines on the market. The machine remains remarkably clean even after operation.

3. While maintaining nail quality, the consumption costs of wear parts such as cutters, nail dies, and punches are significantly reduced, resulting in cost savings.

4. Ordinary nail making machines have a large sliding stroke and many sliding friction parts, with a single machine consuming over 2 kw, and 2.5 machines consuming 5-6 kw. Our high speed nail making machine consumes approximately 3.5 kw. This saves about 20 kw-hours of electricity per ton of nails produced. Therefore, our machine is more energy-efficient.

5. The high efficiency resulting from high speed leads to a 60% reduction in nailing labor costs; because every nail produced is of high quality, if a high-frequency welding machine is added, the efficiency of nail coiling can be increased by at least 50%, for example, to a nail coiling speed of about 1900 nails/minute. Since every nail produced is of good quality and does not jam or stop the machine, the actual nail coiling speed is also increased by more than 30%, thereby reducing nail coiling labor costs by about 40%.

1 Inch Nail Making Machine X50

1 Inch Nail Making Machine X50

Energy consumption

Hot Tags: 1 inch nail making machine x50, China 1 inch nail making machine x50 manufacturers, suppliers