Main uses and scope of application
Our 6 Inch High Speed Wire Nail Making Machine is a high-speed energy-saving nail making equipment, mainly used for the production and processing of high-quality pneumatic gun nails, coil nails, ordinary round nails, and paper nails, with a span diameter of 2.5-5.0mm and a length of 70-150mm.
Performance and structural advantages
1) The main features of this machine are simple structure, good rigidity, easy use and low maintenance cost.
The machine tool straight shaft cam and crankshaft do not require maintenance, and are connected by synchronous belts, which are easy to adjust and have low cost.
2) The cutters and nail dies are based on the cam lever principle, which is simple and reliable, and the precision control is stable.
3) The nail die is a double-die double-punch structure to ensure that the nail cap is concentric and the ratio of the nail shank to the nail cap diameter is large. Single-die single-punch can also be used.
Processing Range: Typically, it can process nails ranging from 1 inch to 6 inches in length (approximately 25mm-150mm), with applicable wire diameters between 1.5mm and 4.5mm.
Production Speed: This is the core characteristic of "high speed." Some models can reach speeds of up to 750 pieces/minute, while standard models generally have a capacity of around 280-350 pieces/minute, significantly higher than traditional models.
Core Technology and Processes:
Continuous Cold Forging: High pressure is applied to the steel wire at room temperature, completing the upsetting of the nail head and the fixed-length cutting of the nail shank in one pass, avoiding material performance loss caused by heating.
Multi-Station Synchronization: Through a precise transmission system (such as synchronized clamping cams and shearing cams), multiple actions such as wire feeding, clamping, nail head punching, and wire cutting are completed simultaneously. This is key to achieving high-speed and precise production.
Low Noise Design: Compared to older equipment, the new high-speed machine significantly reduces operating noise through optimized structure (such as the use of a roll forming die).
moderate pricing, and high cost-effectiveness.
For maximizing efficiency: If order volume is large and maximum output per machine is required, ultra-high-speed models with speeds up to 750 pieces/minute can be considered, but initial investment will be correspondingly higher.
For producing small-sized or special nails: For nails shorter than 60mm, specialized models like the HX-Z94-2.5C may be more economical and stable.
Focus on Core Components:
Power and Transmission: The power of the motor and the quality of core components such as gearboxes and bearings directly determine the stability and lifespan of the equipment.
Automation Level: Modern high-speed machines often feature fully automatic functions and can achieve 24-hour continuous production. Some high-end models also support parameter input and intelligent control, greatly reducing reliance on manual labor.
Support and Equipment:
Nail making machines typically need to be used in conjunction with upstream wire drawing machines and downstream polishing machines to form a complete production line.
When purchasing, be sure to confirm the supplier's after-sales service, including installation and commissioning, technical training, and spare parts supply within the 1-year warranty period.
Hot Tags: 6 inch high speed wire nail making machine, China 6 inch high speed wire nail making machine manufacturers, suppliers, Super Speed Nail Making Machine, High Speed Nail Forging Machine X90, X90 High Speed Nail Making Machine, Prime Source Coil Roofing Nail Machine, Automatic Nail Making Machine, Ekta industries 1 6 inch coil nail production line
