Normally Twist Barbed Wire Machine
Reducer of the Barbed Wire Machine applies 8-module herringbone gear and the gear of inlet box is 10-module with speed ratio of 1:1. Materia for axis of high-speed gear is high frequency quenching 40Cr. Tower wheel can be made from common cast steel #55, common cast steel 55# with high-frequency quenching, and common cast steel #55 painted by tungsten carbide according to customers' demand. Transmission bearings are all famous products. Charging system applied sectional coupling that obtain proper bearing of the axis. Reducer , wet box and charging box are on the same base for easy installation and lifting. The surface painting is of high grade and both internal and external of electric-control cabinet applies plastic-spraying process. It is divided into common control and variably-frequency control. Electric parts are all Chinese or international famous brands.
Heavy wet drawing machine is one of our products with more than 20% market share of China and 50% market share of key districts.
Barbed wire machine is divided into: a single strand of barbed wire machine, double-strand barbed wire machine, positive and negative twist barbed wire machine, razor wire machine.
Single strand of barbed wire around the rope machine and received by wire connection composed of two parts, and supporting three disc release wire, smooth machine operation, low noise, safe production, energy province, high production efficiency, and the use of advanced electronic counting control.
Double-strand barbed wire machine and received by wire twisted around the wire connecting two parts of the composition, and supporting four wire tray to put the machine to work to coordinate the various components, the action level machine is mainly used for the production of a variety of multi-strand barbed wire mesh machine, the use of the material should be consistent with stable, flexible and reliable operation.
Parameter
|
Main parameters: |
|||
|
No. |
Item |
Units |
Parameters |
|
1 |
Motor power |
KW |
3 |
|
2 |
Main drive shaft speed |
r/min |
402 |
|
3 |
Strand wire diameter |
mm |
1.6-3.0 |
|
4 |
Barbed wire diameter |
mm |
1.8-2.2 |
|
5 |
Barb distance |
Mm |
76(3") 102(4") 127(5") |
|
6 |
Twist q'ty |
Pcs |
3.5 |
|
7 |
Theoretical output |
Kg/h |
70 |
|
8 |
Total weight |
Kg |
1200 |
|
9 |
Dimension of main part |
mm |
1950*950*1300 |
|
10 |
Dimension of take-twisting part |
mm |
1760*550*760 |
|
Note:Special specification can be customized according to customers' requirements |
|||
Hot Tags: barbed wire making machine, China barbed wire making machine manufacturers, suppliers, Barbed Wire Fence Making Machine, barbed wire machine, Barbed Wire Fence Machine, Barbed Wire Making Machine, Twist Barbed Wire Machine
