Products

A pulley-type wire drawing machine is a fundamental and widely used piece of industrial equipment designed to reduce the cross-sectional diameter of a wire by pulling it through a series of

Wire drawing machines are mainly applied for metal wire processing to make nails, it is a Energy Saving Stright Line Wire Drawing Machine, screw, wire mesh or staples. MODEL 550/440 is a new model

High speed water tank wire drawing and flattening integrated machine adopts 17 dies and 4 axis of cone type pulley rollers, all rollers with tungsten carbide coating. The flattening machine adopts

The most significant advantage. The vertical footprint is much smaller than an equivalent multi-stage horizontal machine, making it ideal for facilities with limited floor space.

Weighing range: 5kg-25kg. Tolerance: ±10g. Speed: 1-2 cartons/min for 50 lbs/carton. Voltage and Power: 220V /50HZ 3.1KW.

Plastic granules for hardware products such as screws, washers, spring washers, nuts, erasers, various toy parts, electrical accessories, vehicle parts, small hardware items, and plastic parts.

The X90 High Speed Nail Making Machine are built with a heavy-duty, reinforced frame and high-quality components to withstand the intense vibrations and stresses of ultra-high-speed operation. This

In the field of industrial heat treatment and material processing, the mesh belt type muffle furnace has emerged as a versatile and efficient equipment, playing a crucial role in enhancing production

In the industrial heat treatment sector, tempering is a critical post-quenching process that relieves internal stresses of hardened materials, adjusts their mechanical properties (such as toughness

Maffle furnace material: Made of imported 310S (Cr25Ni20), with a thickness of 6mm at the top and 6mm at the bottom, pressed and formed.

Holds the large coil of wire and allows it to unwind with minimal resistance. It may be a passive, freely rotating arm or an active, motor-driven unit that helps push the wire forward.

Due to the high operating speed (often hundreds of cuts per minute) and the demanding nature of cutting hardened steel wire, the cutter material must be extremely hard and wear-resistant.