Performance and structural advantages
1) The main features of this machine are simple structure, good rigidity, easy use and low maintenance cost.
The machine tool straight shaft cam and crankshaft do not require maintenance, and are connected by synchronous belts, which are easy to adjust and have low cost.
2) The cutters and nail dies are based on the cam lever principle, which is simple and reliable, and the precision control is stable.
3) The nail die is a double-die double-punch structure to ensure that the nail cap is concentric and the ratio of the nail shank to the nail cap diameter is large. Single-die single-punch can also be used.
Usage Environment
This Construction Nail Making Machine is suitable for the actual environment and operating conditions specified below ambient temperature: -15℃ ~ 45℃, and the 24h average temperature should not exceed 40℃.
Relative humidity: 30% ~ 95%, and the principle of humidity change should not cause condensation.
Altitude: below 1000m.
Atmosphere: no excessive dust, acid gas, corrosive gas and salt.
Technical Data
| Model | AIE-ZDJ-X150 |
| Nail diameter | 3.5-5.0mm |
| Nail length | 70-150mm |
| Working speed | ≤500pcs/min |
| Dimension | 2000*1450*1300mm+1580*1020*1700mm |
| Power | 14kw |
| Weight | 4200kg |
| Nail products | common nails, coil nails, plastic strip nails, epal nails, etc. |
| Nail cap | round cap, no cap |
| Nail point | diamond point, clinch point, no point, chisel point |
| Wire grade | SAE1008-1010 |
Drive system belt parameters
| Synchronous belt | AT20-4020-1000-201Z |
| Synchronous belt | HTD800 |
| Nail feeding synchronous belt | AT10-2410 AT5-2395 |
| Motor belt | B-1524Li |
Installation Notes
1) The installation and commissioning of the machine requires professional personnel. After the installation and commissioning is completed, the test run will be carried out. The following preparations must be made before the test run.
2) Install the protective covers that have been removed for transportation.
3) Clean the foreign matter on the machine.
4) In order to prevent rust, the sliding surface of the machine tool and some metal parts have been coated with a layer of anti-rust oil. During transportation, soil, dust, gravel and dirt are likely to enter the anti-rust coating, so do a cleaning and inspection before starting the machine.
4-1) Whether the various parts of the machine tool are damaged
4-2) Whether there are any missing parts or accessories
4-3) Whether the various parts of the machine tool are lubricated (the oil pump can be manually turned on to add oil)
Test: After the machine is installed and the above preparatory work is done, the test must be carried out very carefully. The test should be carried out at a low speed for about 1 hour. During the whole test period, the machine should not be tested with a large load.
Hot Tags: construction nail making machine, China construction nail making machine manufacturers, suppliers, Super Speed Nail Making Machine, High Speed Nail Forging Machine X90, X90 High Speed Nail Making Machine, Prime Source Coil Roofing Nail Machine, Automatic Nail Making Machine, Ekta industries 1 6 inch coil nail production line
