Advantages
1. The produced nail heads have excellent stability, ensuring they are round and straight. Our unique structure, with its double-mold, double-punch, two-stage forming process, eliminates the most troublesome problems in production, such as "airplane heads," "fish tails," and bent nails. Our Wire Nail Manufacturing Machine is equipped with a long/short nail sensor; if a long or short nail is detected during nailing, the machine will immediately stop, ensuring nail quality and greatly reducing the workload of inspectors-a feature not found in other nail-making machines.
2. Low mold usage costs; one set of nail cutters can typically produce 100 tons of nails.
3. Compared to current domestic and international high-speed nail making machines, it has an absolute price advantage, high cost-effectiveness, simple operation, and saves time and labor when changing specifications.
4. Our machine has low requirements for wire and environment (it can process both black and shiny wires).
5. The machine has high stability and a speed of up to 760 nails/minute; it can significantly save labor and increase production capacity (more than double the production capacity under the same site and labor conditions). It can basically operate without intervention after startup; if common nail quality problems occur during nail making, it can be stopped immediately, ensuring zero waste.
Troubleshooting
|
Fault |
Cause |
Solution |
|
Long and short nails |
1. The nail cutter is blunt and has serious burrs |
Replace the nail cutter |
|
2. The adjustment straightener is too tight |
Readjust |
|
|
3. The wire feeding box and the wire withdrawal box are unstable |
Disassemble and clean, check if the alloy on both sides is worn |
|
|
4. The wire pay-off feeds unsmoothly |
Arrange the wire pay-off |
|
|
5. The wire guide is blocked by dust |
Clean the wire guide |
|
|
6. The wire pay-off wire problem |
Arrange the wire pay-off wire |
|
|
Clamping flat nails |
1. The crankshaft and camshaft are not synchronized |
Reinstall or replace the synchronous belt |
|
2. The wire is not straightened, |
Readjust the straightener |
|
|
3. The synchronous belt AT5 is not in the correct position or is twisted and deformed |
Adjust the position of the synchronous belt or replace the synchronous belt |
|
|
4. The upper side guide is pressed too tightly |
Readjust the right angle block of the upper guide rail |
|
|
5. The position of the nail die hole is not in the correct position of the nail rod on the belt |
Adjust the nail die seat left and right |
Please contact us info@aiemachine.com +8617762388331 , if any inquiry or question.
Hot Tags: automatic wire nail making machine, China automatic wire nail making machine manufacturers, suppliers, Super Speed Nail Making Machine, High Speed Nail Forging Machine X90, X90 High Speed Nail Making Machine, Prime Source Coil Roofing Nail Machine, Automatic Nail Making Machine, Ekta industries 1 6 inch coil nail production line
