Performance and structural advantages
High speed nail making machine in Wire Nail Making Plant
1. The main features of this machine are simple structure, good rigidity, easy use and low maintenance cost.
The machine tool straight shaft cam and crankshaft do not require maintenance, and are connected by synchronous belts, which are easy to adjust and have low cost.
2. The cutters and nail dies are based on the cam lever principle, which is simple and reliable, and the precision control is stable.
3. The nail die is a double-die double-punch structure to ensure that the nail cap is concentric and the ratio of the nail shank to the nail cap diameter is large. Single-die single-punch can also be used.
Technical Data
| Model | AIE-ZDJ-X150 |
| Nail diameter | 3.5-5.0mm |
| Nail length | 70-150mm |
| Working speed | ≤500pcs/min |
| Dimension | 2000*1450*1300mm+1580*1020*1700mm |
| Power | 14kw |
| Weight | 4200kg |
| Nail products | common nails, coil nails, plastic strip nails, epal nails, etc. |
| Nail cap | round cap, no cap |
| Nail point | diamond point, clinch point, no point, chisel point |
| Wire grade | SAE1008-1010 |
Drive system belt parameters
| Synchronous belt | AT20-4020-1000-201Z |
| Synchronous belt | HTD800 |
| Nail feeding synchronous belt | AT10-2410 AT5-2395 |
| Motor belt | B-1524Li |
Common troubleshooting methods
|
Fault |
Reason |
Solution |
|
Pay off does not rotate |
1. The position of the pay off potentiometer sensor is offset |
Adjust the potentiometer position and consult the manufacturer's after-sales staff for details |
|
2. The reducer fails after long-term unrepair |
Repair and oil in time |
|
|
3. The speed knob of the operation panel is not adjusted |
Adjust the material pay off speed to match the nail making machine speed |
|
|
Machine suddenly makes an abnormal sound |
1. The transmission rod spring is broken |
Replace in time after discovery |
|
2. The main synchronous belt is misaligned, resulting in wrong operation |
Adjust the main synchronous belt according to the manual |
|
|
3. The bearing is damaged |
Regularly inspect the straight shaft, crankshaft and large connecting rod bearings |
Hot Tags: wire nail making plant, China wire nail making plant manufacturers, suppliers, Super Speed Nail Making Machine, High Speed Nail Forging Machine X90, X90 High Speed Nail Making Machine, Prime Source Coil Roofing Nail Machine, Automatic Nail Making Machine, Ekta industries 1 6 inch coil nail production line
