Nail Dies Of Nail Making Machine

Nail Dies Of Nail Making Machine

Gripper Dies: Hold the wire firmly in place during the heading and pointing process.
Send Inquiry
Description

 

Types of Nail Dies (By Nail Head Style)

 

 

Flat Head (Common Nail) Dies: The most common type. Creates a flat, circular head with a slight bevel underneath.

Round Head Dies: Creates a dome-shaped head, often used for framing nails.

Brad Head / Finish Nail Dies: Creates a very small, almost invisible head that can be countersunk.

Casing Head Dies: Creates a slightly larger, tapered head than a finish nail, but smaller than a common nail.

Duplex (Double Head) Dies: Creates two heads on the same shank, used for temporary construction like formwork.

Specialty Dies: For roofing nails (large flat heads), concrete nails (fluted heads), etc.

 

How Nail Dies Work in the Machine Cycle

 

Wire Feed: A straight length of wire is fed through the stationary die.

Gripping: Gripper dies clamp the wire.

Heading: The moving punch rams forward, forcing the protruding wire end into the head cavity of the stationary die, forming the nail head.

Pointing & Cutting: The pointing knives move in simultaneously to cut the wire at an angle, creating the point, and to sever the finished nail from the wire stock.

Ejection: The grippers release, and the finished nail is ejected, often by the next wire piece being fed.

 

Critical Technical Specifications

 

Nail Shank Diameter: Determines the bore size of the die (e.g., 2.0mm, 3.4mm, etc.). This is the wire gauge.

Nail Length: Determined by the feed length of the wire, not directly by the die.

Head Style & Dimensions: Defined by the precise machining of the die cavity (diameter, thickness, angle).

Material & Heat Treatment: Usually made from high-grade tool steel (like H13, D2, or tungsten carbide for long runs) and heat-treated to extreme hardness (HRC 58-62+) for wear resistance.

Precision & Finish: The internal surfaces must be mirror-polished to reduce friction, prevent wire galling, and ensure a smooth nail head.

 

contact us

 

Please contact us info@aiemachine.com +8617762388331 , if any inquiry or question.

 

 

 

 

 

 

 

 

 

 

 

Hot Tags: nail dies of nail making machine, China nail dies of nail making machine manufacturers, suppliers, Polyurethane nail conveying timing belt, Thread Rolling Dies, Die for High Speed Nail Making Machine, Thread Rolling Die for Thread Rolling Machine, Nail Cutter Tools, Blade Cutting Tool

Send Inquiry

(0/10)

clearall